- 17” high resolution colour TFT(touch screen control)
- 2D graphical touch screen programming mode
- 3D visualisation in simulation and production
- Exporting of computed flat patterns as DXF files(Profile-T-2D)
- Storage capacity 1 GB - 3D graphics acceleration
- Delem Modusys compatibility (module scalability & adaptivity)
- Automatic tool selection and machine tooling
- 3D Simulation with automatic best bend sequence identification with collision detection
EUROPE STANDARD TOOLING Increase your pressbrake productivity: ACCURL® use all Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.Therefore, raw material yield and tensile strength are guaranteed.are standardized with a 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.ACCURL PRO CNC TABLE CROWNING | MODEL | Unit | EURO PRO B32175 (175 ton x 3200mm) |
| CNC Control Axis | Y1 , Y2 , X , R ,Z1 ,Z2-axis with Crowning | |
| Bending force | Ton | 175 |
| Bending length | mm | 3200 |
| Positioning accuracy | mm | 0.005 |
| Distance between columns | mm | 2700 |
| Bending Accuracy | Degree | ±2’/Per meter |
| Beam Stroke | mm | 200 |
| Daylight | mm | 430 |
| Throat Depth | mm | 400 |
| Table width | mm | 90 |
| Working table height | mm | 940 |
BGA-4 CNC BACK GAUGE SYSTEM ACCURL® press brake are provided are equipped with BGA-4 CNC backgauge constituted by a solid structure in order to assure the best repetitiveness and high precision in axes positioning ACCURL®BGA-4 for CNC BackGauge:
Stroke X = 1000 mm Max. Speed X = 450 mm/s Stroke R = 250 mm Max. Speed Z = 550 mm/s Advantage: ·X ,R-Axis with HIWIN linear guide and Ball Screw. ·CNC(Manual) Z1,Z2-axis with HIWIN linear guide. ·Unprecedented positioning repeatability of ±0.05 (optional ±0.01). ·To reach maximum versatility you can automate both backstops with X1-X2 axes, reaching an angle of 80° on oblique bends.
This feature eliminates the need for time consuming shimming by creating an adjustable crown in the middle of the table. In this system and over under wedge system creates a stable crown to the center of the table or bed . The CNC controlled system is automatically set based on programmed part information.
